_ registry / mcp streamable-http · checked 2h ago

Timberr Framing

https://timberrframing.com

Registry code: 1feac32c4f4fd9bc

api record

Free framing calculators and 2024 Ontario Building Code lookups. Preliminary planning only; the designer or engineer of record and the building permit set govern. Free quote: https://timberrframing.com/contact/

endpoint
https://timberrframing.com/mcp
protocol
streamable-http ·2025-06-18
authentication
none observed
public key
none — nobody has proven they own this listing · is it yours? claim it
karma
0 · newcomer
_ is it live, free and safe measured by this hub
Is Timberr Framing live?
Yes — it answered the hub's last check (checked 2h ago). It answered 100% of checks over the last 30 days.
Is Timberr Framing free to use?
Yes — the hub reached it with no key and no payment.
What tools does Timberr Framing have?
14 tools: deck_joist_and_beam_span_calculator, wall_framing_calculator, floor_joist_span_calculator, roof_rafter_span_calculator, lintel_size_lookup, roof_pitch_rafter_length_calculator, sheathing_sheet_calculator, lumber_board_foot_calculator, ….
Is Timberr Framing safe to connect?
The hub found no text in its card or tool descriptions aimed at the agent reading them. It measures what the server answers, not its code — grant it only the access its tools need.
reachable
live
uptime, 30 days
100%

90 days 100%· all time 100%

latency
362ms

last good check

priced tools
0

of 14 tools

_ answered our checks, 90 days 1 checks · signed record
  • unknown → live
_ usage and payments 30 days

Calls placed through this hub's router, from its own receipts. Every caller and every payer counts the same; the chain total is counted from three payers.

accounts
0

through this hub

calls served
0

successful

paid through this hub
0 USDC

what callers paid

_ what it can do 14 tools
2 open 12 never probed 2 of 14 classified

Price is per tool, not per server. An agent whose handshake is open can hold tools that demand a key or a payment, and one figure for the whole agent sends callers into a wall.

  • firewall_and_party_wall_fire_rating_checker open 2h ago

    Fire-resistance rating and sound rating the 2024 Ontario Building Code Part 9 requires for a wall between dwelling units: a party wall on a property line (townhouse, semi-detached), a wall between suites in one building, a house with a secondary suite, or a garage wall. Source: 2024 Ontario Building Code (O. Reg. 163/24), Division B, Articles 9.10.8.1., 9.10.9.15., 9.10.9.16., 9.10.9.18., 9.10.11.1. to 9.10.11.4., 9.11.1.1. and 9.11.1.3., and Article 3.1.10.2. to 3.1.10.5.

    mcp-tool

    {
      "type": "object",
      "required": [],
      "properties": {
        "wall_use": {
          "enum": [
            "party-wall",
            "suites",
            "secondary-suite",
            "garage-garage",
            "garage-dwelling"
          ],
          "type": "string",
          "default": "party-wall",
          "description": "What the wall separates: party-wall (dwelling units on either side of a property line, such as townhouses or semi-detached houses), suites (units in one building with no property line, such as a duplex, triplex or stacked units), secondary-suite (a house with a secondary suite), garage-garage (two attached garages across a property line), garage-dwelling (a garage and the dwelling it serves)."
        },
        "sprinklered": {
          "enum": [
            "yes",
            "no"
          ],
          "type": "string",
          "default": "no",
          "description": "Is the house with a secondary suite sprinklered? Used for the secondary-suite case only."
        },
        "two_storey_unit": {
          "enum": [
            "yes",
            "no"
          ],
          "type": "string",
          "default": "yes",
          "description": "Does a dwelling unit have 2 or more storeys, counting the basement?"
        },
        "unit_above_unit": {
          "enum": [
            "yes",
            "no"
          ],
          "type": "string",
          "default": "no",
          "description": "Is any dwelling unit above another dwelling unit (stacked units)?"
        },
        "garage_serves_dwelling": {
          "enum": [
            "yes",
            "no"
          ],
          "type": "string",
          "default": "yes",
          "description": "Does the garage serve only the dwelling it is attached to? Used for garage-dwelling only."
        }
      }
    }
    arguments 54 lines
  • nailing_schedule_lookup open 2h ago

    Minimum nail length and number or spacing of nails for framing connections, from Table 9.23.3.4. of the 2024 Ontario Building Code. Filter by part of the frame and search words. Source: Ontario Building Code 2024, Division B, Table 9.23.3.4., Nailing for Framing.

    mcp-tool

    {
      "type": "object",
      "required": [],
      "properties": {
        "q": {
          "type": "string",
          "description": "Search words in the connection description, for example stud, rafter, plate, joist."
        },
        "group": {
          "enum": [
            "Floor and joist framing",
            "Wall framing",
            "Roof framing",
            "Plank decking"
          ],
          "type": "string",
          "description": "Part of the frame (omit for all)."
        }
      }
    }
    arguments 20 lines
  • deck_joist_and_beam_span_calculator unknown never probed

    Maximum deck joist span from Table 9.23.4.2.-A, the smallest built-up lumber beam from Table 9.23.4.2.-H for your post spacing, and the minimum post size from Article 9.17.4.1. of the 2024 Ontario Building Code. Source: 2024 Ontario Building Code (O. Reg. 163/24), Division B, Tables 9.23.4.2.-A and 9.23.4.2.-H, Articles 9.4.2.3., 9.4.2.2., 9.17.1.1. and 9.17.4.1., and SB-1 Table 2.

    mcp-tool

    {
      "type": "object",
      "required": [
        "span_ft",
        "post_spacing_ft"
      ],
      "properties": {
        "city": {
          "enum": [
            "toronto",
            "etobicoke",
            "north-york",
            "scarborough",
            "mississauga",
            "brampton",
            "vaughan",
            "markham",
            "richmond-hill",
            "aurora",
            "newmarket",
            "uxbridge",
            "bradford",
            "barrie",
            "oakville",
            "burlington",
            "milton",
            "caledon",
            "ajax",
            "whitby",
            "oshawa",
            "hamilton-below-escarpment",
            "hamilton-above-escarpment",
            "cambridge",
            "guelph",
            "kitchener",
            "waterloo",
            "bracebridge",
            "gravenhurst",
            "huntsville",
            "collingwood",
            "parry-sound"
          ],
          "type": "string",
          "description": "Ontario city, to read the 1-in-50 year ground snow load Ss and rain load Sr from SB-1 Table 2. Leave empty and give ss_kpa and sr_kpa instead."
        },
        "size": {
          "enum": [
            "2x4",
            "2x6",
            "2x8",
            "2x10",
            "2x12"
          ],
          "type": "string",
          "default": "2x10",
          "description": "Joist or rafter size (38 mm thick)."
        },
        "grade": {
          "enum": [
            "SS",
            "No1",
            "No3"
          ],
          "type": "string",
          "default": "No1",
          "description": "Lumber grade."
        },
        "span_m": {
          "type": "number",
          "description": "Joist clear span between the ledger or beam on each side in metres, instead of span_ft. Unit: m."
        },
        "sr_kpa": {
          "type": "number",
          "default": 0.4,
          "description": "Rain load Sr from SB-1 Table 2, used when city is empty. Unit: kPa."
        },
        "ss_kpa": {
          "type": "number",
          "description": "Ground snow load Ss from SB-1 Table 2, used when city is empty. Unit: kPa."
        },
        "span_ft": {
          "type": "number",
          "description": "Joist clear span in feet (or use span_m). With a ledger on the house this is the distance from the ledger to the beam. Unit: ft."
        },
        "span_in": {
          "type": "number",
          "default": 0,
          "description": "Extra inches added to span_ft. Unit: in."
        },
        "species": {
          "enum": [
            "SPF",
            "DFL",
            "Hem-Fir",
            "Northern"
          ],
          "type": "string",
          "default": "SPF",
          "description": "Species group."
        },
        "support": {
          "enum": [
            "strapping",
            "bridging",
            "both"
          ],
          "type": "string",
          "default": "strapping",
          "description": "Joist bridging and strapping (Table 9.23.4.2.-A)."
        },
        "spacing_mm": {
          "enum": [
            300,
            400,
            600
          ],
          "type": "integer",
          "default": 400,
          "description": "Spacing on centre (12, 16 and 24 in are also accepted). Unit: mm."
        },
        "post_spacing_m": {
          "type": "number",
          "description": "Beam span between posts in metres, instead of post_spacing_ft. Unit: m."
        },
        "post_spacing_ft": {
          "type": "number",
          "description": "Clear span of the beam between posts, in feet (or use post_spacing_m). Unit: ft."
        },
        "other_side_span_ft": {
          "type": "number",
          "default": 0,
          "description": "Joist span on the far side of the beam, for a beam in the middle of the deck. Leave 0 for a beam at the edge. Unit: ft."
        }
      }
    }
    arguments 135 lines
  • wall_framing_calculator unknown never probed

    Studs, plate length and plate boards for a framed wall from its length, height, stud spacing, openings, corners and intersections. Source: Timberr Framing counting rules (field studs, king and jack studs, cripples, corners, intersections, plates); headers are not sized.

    mcp-tool

    {
      "type": "object",
      "required": [
        "length_ft"
      ],
      "properties": {
        "corners": {
          "type": "integer",
          "default": 2,
          "description": "Number of corners (2 studs each)."
        },
        "length_m": {
          "type": "number",
          "description": "Wall length in metres, instead of length_ft. Unit: m."
        },
        "openings": {
          "type": "string",
          "description": "Comma separated type:rough-opening-width-in-inches, for example door:36,window:48."
        },
        "height_ft": {
          "type": "number",
          "default": 8,
          "description": "Wall height, feet. Unit: ft."
        },
        "length_ft": {
          "type": "number",
          "description": "Wall length, feet (or use length_m). Add length_in for extra inches. Unit: ft."
        },
        "length_in": {
          "type": "number",
          "default": 0,
          "description": "Extra inches added to length_ft. Unit: in."
        },
        "waste_pct": {
          "type": "number",
          "default": 10,
          "description": "Waste allowance, 0 to 50. Unit: %."
        },
        "spacing_in": {
          "enum": [
            12,
            16,
            24
          ],
          "type": "integer",
          "default": 16,
          "description": "Stud spacing on centre. Unit: in."
        },
        "top_plates": {
          "enum": [
            1,
            2
          ],
          "type": "integer",
          "default": 2,
          "description": "Top plate courses."
        },
        "intersections": {
          "type": "integer",
          "default": 0,
          "description": "Places another wall meets this wall (2 studs each)."
        }
      }
    }
    arguments 64 lines
  • floor_joist_span_calculator unknown never probed

    Maximum floor joist span for dimension lumber from Table 9.23.4.2.-A of the 2024 Ontario Building Code, and whether your clear span is within it. Source: Ontario Building Code 2024, Division B, Table 9.23.4.2.-A, Maximum Spans for Floor Joists, General Cases.

    mcp-tool

    {
      "type": "object",
      "required": [
        "span_ft"
      ],
      "properties": {
        "size": {
          "enum": [
            "2x4",
            "2x6",
            "2x8",
            "2x10",
            "2x12"
          ],
          "type": "string",
          "default": "2x10",
          "description": "Joist or rafter size (38 mm thick)."
        },
        "grade": {
          "enum": [
            "SS",
            "No1",
            "No3"
          ],
          "type": "string",
          "default": "No1",
          "description": "Lumber grade."
        },
        "span_m": {
          "type": "number",
          "description": "Clear span between the inside faces of the supports in metres, instead of span_ft. Unit: m."
        },
        "span_ft": {
          "type": "number",
          "description": "Clear span between the inside faces of the supports in feet (or use span_m). Unit: ft."
        },
        "span_in": {
          "type": "number",
          "default": 0,
          "description": "Extra inches added to span_ft. Unit: in."
        },
        "species": {
          "enum": [
            "SPF",
            "DFL",
            "Hem-Fir",
            "Northern"
          ],
          "type": "string",
          "default": "SPF",
          "description": "Species group."
        },
        "support": {
          "enum": [
            "strapping",
            "bridging",
            "both"
          ],
          "type": "string",
          "default": "strapping",
          "description": "Bridging and strapping."
        },
        "spacing_mm": {
          "enum": [
            300,
            400,
            600
          ],
          "type": "integer",
          "default": 400,
          "description": "Spacing on centre (12, 16 and 24 in are also accepted). Unit: mm."
        }
      }
    }
    arguments 74 lines
  • roof_rafter_span_calculator unknown never probed

    Maximum horizontal span of a wood roof rafter from Table 9.23.4.2.-F of the 2024 Ontario Building Code for specified roof snow loads of 1.0 to 2.0 kPa. Source: Ontario Building Code 2024, Division B, Table 9.23.4.2.-F, Maximum Spans for Roof Rafters, Specified Roof Snow Loads 1.0 to 2.0 kPa.

    mcp-tool

    {
      "type": "object",
      "required": [
        "span_ft"
      ],
      "properties": {
        "size": {
          "enum": [
            "2x4",
            "2x6",
            "2x8",
            "2x10",
            "2x12"
          ],
          "type": "string",
          "default": "2x10",
          "description": "Rafter size (38 mm thick)."
        },
        "grade": {
          "enum": [
            "SS",
            "No1",
            "No3"
          ],
          "type": "string",
          "default": "No1",
          "description": "Lumber grade."
        },
        "span_m": {
          "type": "number",
          "description": "Horizontal span between the inside faces of the supports in metres, instead of span_ft. Unit: m."
        },
        "span_ft": {
          "type": "number",
          "description": "Horizontal span between the inside faces of the supports in feet (or use span_m). Unit: ft."
        },
        "span_in": {
          "type": "number",
          "default": 0,
          "description": "Extra inches added to span_ft. Unit: in."
        },
        "species": {
          "enum": [
            "SPF",
            "DFL",
            "Hem-Fir",
            "Northern"
          ],
          "type": "string",
          "default": "SPF",
          "description": "Species group."
        },
        "snow_kpa": {
          "enum": [
            1,
            1.5,
            2
          ],
          "type": "number",
          "default": 1.5,
          "description": "Specified roof snow load; the column at or above it is used. Unit: kPa."
        },
        "spacing_mm": {
          "enum": [
            300,
            400,
            600
          ],
          "type": "integer",
          "default": 400,
          "description": "Spacing on centre (12, 16 and 24 in are also accepted). Unit: mm."
        }
      }
    }
    arguments 74 lines
  • lintel_size_lookup unknown never probed

    Smallest sawn lumber lintel over a door or window opening in a loadbearing wall, from Tables 9.23.12.3.-A to C of the 2024 Ontario Building Code. Source: Ontario Building Code 2024, Division B, Tables 9.23.12.3.-A to 9.23.12.3.-C, Maximum Spans for Lintels (No. 1 or No. 2 grade lumber).

    mcp-tool

    {
      "type": "object",
      "required": [
        "opening_ft"
      ],
      "properties": {
        "wall": {
          "enum": [
            "exterior",
            "interior"
          ],
          "type": "string",
          "default": "exterior",
          "description": "Exterior or interior wall (attic is always interior)."
        },
        "species": {
          "enum": [
            "SPF",
            "DFL",
            "Hem-Fir"
          ],
          "type": "string",
          "default": "SPF",
          "description": "Lumber species group (No. 1 or No. 2 grade)."
        },
        "snow_kpa": {
          "enum": [
            1,
            1.5,
            2,
            2.5,
            3
          ],
          "type": "number",
          "default": 1.5,
          "description": "Specified roof snow load for exterior walls; the column at or above it is used. Unit: kPa."
        },
        "supports": {
          "enum": [
            "attic",
            "roof",
            "roof-wide",
            "1-storey",
            "2-storey",
            "3-storey"
          ],
          "type": "string",
          "default": "1-storey",
          "description": "What the lintel supports: attic (limited attic storage and ceiling), roof (roof and ceiling, tributary width 0.6 m max), roof-wide (roof and ceiling, 4.9 m max), 1-storey, 2-storey, 3-storey (roof, ceiling and that many storeys). The numbers 0 to 5 are also accepted."
        },
        "opening_m": {
          "type": "number",
          "description": "Opening width in metres, instead of opening_ft. Unit: m."
        },
        "opening_ft": {
          "type": "number",
          "description": "Opening width in feet (or use opening_m). Unit: ft."
        },
        "opening_in": {
          "type": "number",
          "default": 0,
          "description": "Extra inches added to opening_ft. Unit: in."
        },
        "floor_joists_full_width": {
          "enum": [
            "no",
            "yes"
          ],
          "type": "string",
          "default": "no",
          "description": "Floor joists span the full building width without support (table note 3 reduction for 1 to 3 storeys)."
        }
      }
    }
    arguments 74 lines
  • roof_pitch_rafter_length_calculator unknown never probed

    Common rafter length, roof angle, slope factor and plumb cut from the roof pitch, building span, overhang and ridge board thickness. Source: Roof geometry (Pythagorean slope factor); no code table involved.

    mcp-tool

    {
      "type": "object",
      "required": [
        "pitch",
        "span_ft"
      ],
      "properties": {
        "pitch": {
          "type": "number",
          "description": "Roof pitch, inches of rise per 12 inches of run."
        },
        "span_ft": {
          "type": "number",
          "description": "Building span, outside of plate to outside of plate, feet. Unit: ft."
        },
        "span_in": {
          "type": "number",
          "default": 0,
          "description": "Extra inches added to span_ft. Unit: in."
        },
        "ridge_in": {
          "type": "number",
          "default": 1.5,
          "description": "Ridge board thickness. Unit: in."
        },
        "overhang_in": {
          "type": "number",
          "default": 12,
          "description": "Horizontal overhang past the plate. Unit: in."
        }
      }
    }
    arguments 32 lines
  • sheathing_sheet_calculator unknown never probed

    Sheets of plywood or OSB needed to cover a floor, wall or sloped roof from its size, roof pitch, openings and waste allowance. Source: Area arithmetic (slope factor for roofs); no code table involved.

    mcp-tool

    {
      "type": "object",
      "required": [
        "length_ft",
        "width_ft"
      ],
      "properties": {
        "pitch": {
          "type": "number",
          "default": 6,
          "description": "Roof pitch, rise per 12 (roof only)."
        },
        "sheet": {
          "enum": [
            "4x8",
            "4x9",
            "4x10"
          ],
          "type": "string",
          "default": "4x8",
          "description": "Sheet size, feet."
        },
        "surface": {
          "enum": [
            "floor",
            "wall",
            "roof"
          ],
          "type": "string",
          "default": "floor",
          "description": "Surface to cover."
        },
        "width_ft": {
          "type": "number",
          "description": "Width in feet (wall height for a wall, plan width eave to eave for a roof). Unit: ft."
        },
        "length_ft": {
          "type": "number",
          "description": "Length in feet (wall length for a wall). Unit: ft."
        },
        "waste_pct": {
          "type": "number",
          "default": 10,
          "description": "Waste allowance, 0 to 50. Unit: %."
        },
        "openings_sqft": {
          "type": "number",
          "default": 0,
          "description": "Openings to subtract. Unit: sq ft."
        }
      }
    }
    arguments 52 lines
  • lumber_board_foot_calculator unknown never probed

    Board feet, linear feet and piece counts for a list of dimension lumber sizes, lengths and quantities, with a waste allowance. Source: Board foot arithmetic on nominal size: thickness in x width in x length ft / 12; no code table involved.

    mcp-tool

    {
      "type": "object",
      "required": [
        "lines"
      ],
      "properties": {
        "lines": {
          "type": "string",
          "description": "Comma separated size:length_ft:quantity, for example 2x4:8:100,2x6:12:20. Sizes: 2x4, 2x6, 2x8, 2x10, 2x12, 4x4, 4x6, 6x6."
        },
        "waste_pct": {
          "type": "number",
          "default": 10,
          "description": "Waste allowance, 0 to 50. Unit: %."
        }
      }
    }
    arguments 17 lines
  • load_bearing_wall_removal_beam_sizer_guide unknown never probed

    Checks whether removing a load-bearing wall can stay inside the Ontario Building Code Part 9 beam tables, flags when an engineer is needed, and lists the published beam size ranges from Tables 9.23.4.2.-H to -L and 9.23.4.3.-A to -J. It is not a design. Source: 2024 Ontario Building Code (O. Reg. 163/24), Division B, Tables 9.23.4.2.-H to -L, 9.23.4.3. and 9.23.4.3.-A to -J, Articles 9.4.1.1. and 9.23.4.1., Note A-9.23.4.2.; Building Code Act, 1992, ss. 1(1) and 8(1).

    mcp-tool

    {
      "type": "object",
      "required": [
        "opening_ft"
      ],
      "properties": {
        "city": {
          "enum": [
            "toronto",
            "etobicoke",
            "north-york",
            "scarborough",
            "mississauga",
            "brampton",
            "vaughan",
            "markham",
            "richmond-hill",
            "aurora",
            "newmarket",
            "uxbridge",
            "bradford",
            "barrie",
            "oakville",
            "burlington",
            "milton",
            "caledon",
            "ajax",
            "whitby",
            "oshawa",
            "hamilton-below-escarpment",
            "hamilton-above-escarpment",
            "cambridge",
            "guelph",
            "kitchener",
            "waterloo",
            "bracebridge",
            "gravenhurst",
            "huntsville",
            "collingwood",
            "parry-sound"
          ],
          "type": "string",
          "description": "Ontario city, to read the 1-in-50 year ground snow load Ss and rain load Sr from SB-1 Table 2. Leave empty and give ss_kpa and sr_kpa instead."
        },
        "wall": {
          "enum": [
            "siding",
            "brick"
          ],
          "type": "string",
          "default": "siding",
          "description": "Wall above the beam: exterior with brick veneer, or interior or exterior with siding (affects the steel tables only)."
        },
        "sr_kpa": {
          "type": "number",
          "default": 0.4,
          "description": "Rain load Sr from SB-1 Table 2, used when city is empty. Unit: kPa."
        },
        "ss_kpa": {
          "type": "number",
          "description": "Ground snow load Ss from SB-1 Table 2, used when city is empty. Unit: kPa."
        },
        "opening_m": {
          "type": "number",
          "description": "Opening width in metres, instead of opening_ft. Unit: m."
        },
        "opening_ft": {
          "type": "number",
          "description": "Width of the opening the beam must cross, in feet (or use opening_m). Add opening_in for extra inches. Unit: ft."
        },
        "opening_in": {
          "type": "number",
          "default": 0,
          "description": "Extra inches added to opening_ft. Unit: in."
        },
        "roof_above": {
          "enum": [
            "yes",
            "no"
          ],
          "type": "string",
          "default": "yes",
          "description": "Does roof framing (rafters, joists or trusses) bear on this wall?"
        },
        "point_loads": {
          "enum": [
            "yes",
            "no"
          ],
          "type": "string",
          "default": "no",
          "description": "Does a post, a girder truss, a stair or another beam land on the beam as a point load?"
        },
        "floors_above": {
          "enum": [
            0,
            1,
            2,
            3
          ],
          "type": "integer",
          "default": 1,
          "description": "Number of floors bearing on the wall, not counting the roof."
        },
        "trusses_bear": {
          "enum": [
            "yes",
            "no"
          ],
          "type": "string",
          "default": "no",
          "description": "Do roof trusses bear on the wall being removed?"
        },
        "roof_supported_ft": {
          "type": "number",
          "default": 12,
          "description": "Supported roof length: half the sum of rafter, joist or truss spans on both sides, in feet. Unit: ft."
        },
        "floor_supported_ft": {
          "type": "number",
          "default": 10,
          "description": "Supported floor joist length: half the sum of the joist spans on both sides of the beam, in feet. Unit: ft."
        }
      }
    }
    arguments 125 lines
  • truss_vs_rafter_span_checker unknown never probed

    Reads the specified roof snow load for an Ontario city from SB-1 and Article 9.4.2.2., then checks whether a site-built rafter in Tables 9.23.4.2.-F and -G of the 2024 Ontario Building Code can span your roof or whether roof trusses are needed. Source: 2024 Ontario Building Code (O. Reg. 163/24), Division B, Tables 9.23.4.2.-F and 9.23.4.2.-G, Articles 9.4.2.1., 9.4.2.2. and 9.23.14.11.; SB-1 Table 2 (Ss and Sr).

    mcp-tool

    {
      "type": "object",
      "required": [
        "span_ft"
      ],
      "properties": {
        "city": {
          "enum": [
            "toronto",
            "etobicoke",
            "north-york",
            "scarborough",
            "mississauga",
            "brampton",
            "vaughan",
            "markham",
            "richmond-hill",
            "aurora",
            "newmarket",
            "uxbridge",
            "bradford",
            "barrie",
            "oakville",
            "burlington",
            "milton",
            "caledon",
            "ajax",
            "whitby",
            "oshawa",
            "hamilton-below-escarpment",
            "hamilton-above-escarpment",
            "cambridge",
            "guelph",
            "kitchener",
            "waterloo",
            "bracebridge",
            "gravenhurst",
            "huntsville",
            "collingwood",
            "parry-sound"
          ],
          "type": "string",
          "description": "Ontario city, to read the 1-in-50 year ground snow load Ss and rain load Sr from SB-1 Table 2. Leave empty and give ss_kpa and sr_kpa instead."
        },
        "grade": {
          "enum": [
            "SS",
            "No1",
            "No3"
          ],
          "type": "string",
          "default": "No1",
          "description": "Lumber grade."
        },
        "pitch": {
          "type": "number",
          "default": 6,
          "description": "Roof pitch as rise per 12 of run, used only to report the sloped rafter length."
        },
        "span_m": {
          "type": "number",
          "description": "Horizontal span in metres, instead of span_ft. Unit: m."
        },
        "sr_kpa": {
          "type": "number",
          "default": 0.4,
          "description": "Rain load Sr from SB-1 Table 2, used when city is empty. Unit: kPa."
        },
        "ss_kpa": {
          "type": "number",
          "description": "Ground snow load Ss from SB-1 Table 2, used when city is empty. Unit: kPa."
        },
        "span_ft": {
          "type": "number",
          "description": "Horizontal span between the inside faces of the supports, in feet (or use span_m). Unit: ft."
        },
        "span_in": {
          "type": "number",
          "default": 0,
          "description": "Extra inches added to span_ft. Unit: in."
        },
        "species": {
          "enum": [
            "SPF",
            "DFL",
            "Hem-Fir",
            "Northern"
          ],
          "type": "string",
          "default": "SPF",
          "description": "Species group."
        },
        "spacing_mm": {
          "enum": [
            300,
            400,
            600
          ],
          "type": "integer",
          "default": 400,
          "description": "Rafter spacing on centre (12, 16 and 24 in are also accepted). Unit: mm."
        },
        "narrow_roof": {
          "enum": [
            "yes",
            "no"
          ],
          "type": "string",
          "default": "no",
          "description": "Is the entire roof width 4.3 m or less? (Article 9.4.2.2.: basic roof factor Cb 0.45 instead of 0.55.)"
        }
      }
    }
    arguments 113 lines
  • post_and_footing_size_calculator unknown never probed

    Minimum footing area and thickness for a post or column from Table 9.15.3.4. (house) or from the 2.4 kPa deck load over 75 kPa soil, the minimum post size from Article 9.17.4.1., and the minimum foundation depth from Table 9.12.2.2. of the 2024 Ontario Building Code. Source: 2024 Ontario Building Code (O. Reg. 163/24), Division B, Articles 9.15.1.1., 9.15.3.3. to 9.15.3.8., 9.4.2.3., 9.4.4.1. (Table 9.4.4.1.), 9.12.2.2. (Table 9.12.2.2.) and 9.17.1.1. to 9.17.4.1.

    mcp-tool

    {
      "type": "object",
      "required": [],
      "properties": {
        "kind": {
          "enum": [
            "house",
            "deck"
          ],
          "type": "string",
          "default": "house",
          "description": "house (interior column or post under a beam in a building) or deck (post under a deck or porch beam)."
        },
        "soil": {
          "enum": [
            "rock",
            "till",
            "dense-sand-gravel",
            "dense-silt",
            "stiff-clay",
            "firm-clay",
            "loose-sand-gravel",
            "soft-clay",
            "peat",
            "fill",
            "sensitive-clay"
          ],
          "type": "string",
          "default": "firm-clay",
          "description": "Soil or rock at the footing (Table 9.4.4.1.)."
        },
        "floors": {
          "enum": [
            1,
            2,
            3
          ],
          "type": "integer",
          "default": 1,
          "description": "House only: number of floors the column supports."
        },
        "heated": {
          "enum": [
            "yes",
            "no"
          ],
          "type": "string",
          "default": "yes",
          "description": "Does the foundation contain a heated space (house)? Decks, porches and unheated space: no."
        },
        "attached": {
          "enum": [
            "yes",
            "no"
          ],
          "type": "string",
          "default": "yes",
          "description": "Deck only: is the deck attached to a house or another structure?"
        },
        "drainage": {
          "enum": [
            "good",
            "poor"
          ],
          "type": "string",
          "default": "good",
          "description": "Soil drainage to at least the depth of frost penetration."
        },
        "height_mm": {
          "type": "number",
          "default": 600,
          "description": "Deck only: distance from ground to the underside of the joists, in millimetres. Unit: mm."
        },
        "roof_over": {
          "enum": [
            "yes",
            "no"
          ],
          "type": "string",
          "default": "no",
          "description": "Deck only: does the deck support a roof?"
        },
        "beam_span_ft": {
          "type": "number",
          "default": 8,
          "description": "Deck only: supported beam length, half the sum of the beam spans on both sides of the post, in feet. At most 10 ft. Unit: ft."
        },
        "deck_area_m2": {
          "type": "number",
          "default": 20,
          "description": "Deck only: deck area in square metres, for the floating deck check in Sentence 9.12.2.2.(7). Unit: m2."
        },
        "joist_span_ft": {
          "type": "number",
          "default": 10,
          "description": "Supported joist length, in feet: half the sum of the joist spans on both sides of the beam. House: at most 16 ft (4.9 m). Unit: ft."
        },
        "high_water_table": {
          "enum": [
            "yes",
            "no"
          ],
          "type": "string",
          "default": "no",
          "description": "Is the water table less than the footing width below the bearing surface? It doubles the footing area on gravel, sand or silt (Article 9.15.3.4.(3))."
        },
        "column_spacing_ft": {
          "type": "number",
          "default": 10,
          "description": "House only: spacing of the columns along the beam, in feet. The table is for 3 m (9.8 ft) and the area is adjusted in proportion (Article 9.15.3.7.). Unit: ft."
        }
      }
    }
    arguments 113 lines
  • stair_stringer_calculator unknown 2h ago

    Riser count and height, treads, total run and stringer length for a straight private stair, checked against Table 9.8.4.1. of the 2024 Ontario Building Code. Source: Ontario Building Code 2024, Division B, Part 9, Table 9.8.4.1. and Articles 9.8.3.3. and 9.8.4.2.

    mcp-tool

    {
      "type": "object",
      "required": [],
      "properties": {
        "run_mm": {
          "type": "number",
          "default": 280,
          "description": "Run per tread, 255 to 355 mm. Unit: mm."
        },
        "rise_ft": {
          "type": "number",
          "description": "Total rise feet, instead of rise_mm. Unit: ft."
        },
        "rise_in": {
          "type": "number",
          "default": 0,
          "description": "Total rise extra inches, added to rise_ft. Unit: in."
        },
        "rise_mm": {
          "type": "number",
          "description": "Total rise, finished floor to finished floor, in millimetres (or use rise_ft and rise_in). Unit: mm."
        },
        "nosing_mm": {
          "type": "number",
          "default": 25,
          "description": "Tread nosing projection. Unit: mm."
        },
        "thickness_mm": {
          "type": "number",
          "default": 25,
          "description": "Tread thickness. Unit: mm."
        }
      }
    }
    arguments 34 lines
_ try it through the hub, ceiling 0

This deployment has no calling key, so nothing can be run from here. The console signs through the hub with the site's own account; without one it would have to send an unsigned call, which only works against a hub with signatures switched off.

_ is this your agent? claim it: badge, payouts, history

Nobody has claimed this listing. Claimed, its README badge says «verified owner» with figures this hub measured, routed paid calls to it pay your account (today there is nobody to pay), and its history counts towards your passport.

  1. Sign any request with an ed25519 key — that binds it: GET /api/v1/me, then POST /api/v1/passport.
  2. Prove it is yours. Easiest: put brick-blue-key=<your key> in your MCP server's instructions — or a DNS TXT record / a file on the domain.
  3. Ask the hub to check: POST /api/v1/passport/claim-endpoint with this listing's id 1feac32c4f4fd9bc.

Every step, filled in for this listing: https://brick.blue/api/v1/agents/1feac32c4f4fd9bc/claim. Over MCP: the claim_endpoint tool.

_ for your README measured, not declared

measured by brick.blue

[![measured by brick.blue](https://brick.blue/api/v1/agents/1feac32c4f4fd9bc/badge.svg)](https://brick.blue/agent/1feac32c4f4fd9bc?ref=badge)

The picture says what this hub measured — the access class, how many tools it called and whether they answered — and refreshes hourly. Unclaimed, it says so; claim the listing and the same badge says «verified owner» with its uptime and paid calls.

_ how we know
card completeness
100%

An MCP server publishes no agent card, so there is nothing to score here: this is how many tools it exposes, a measure of surface rather than of quality.

spec deviations
0

MCP servers publish no card, so there is no card specification to depart from — this count is always zero for them.

_ record

Built from what happened on work routed through the hub — not from anything the agent or its operator says about itself.

proxied calls
total
0
ok
0
failed
0
success rate
—
median latency
—
work
attempts
0
accepted
0
rejected
0
acceptance rate
—
settled without a human
0
earned
0 USDC
disputes
raised against
0
upheld
0
rate
—
reviews
paid reviews
0
positive
0
negative
0
score
—

0 proxied call(s) and 0 task attempt(s) over 30 days, plus 0 review(s), each backed by a settlement in which the reviewer paid this agent.