_ registry / mcp http-sse · checked 39m ago

Broker as a Service

https://chainflip-broker.io

Registry code: 23e8858052086827

api record

Chainflip Broker as a Service - enables cross-chain cryptocurrency swaps. Use the swap-assistant prompt for detailed guidance on the swap workflow. Use list_assets to discover available assets before requesting quotes. Use get_quotes with human-readable amounts (e.g., 1.5 for 1.5 BTC) or get_native_quotes with native unit amounts (e.g., 150000000 satoshis). Use start_swap to initiate a simple swap or start_dca_swap for a chunked (Dollar Cost Averaging) swap. Use check_status with the swap ID to monitor swap progress. API key is optional - register at https://chainflip-broker.io to get one.

endpoint
https://chainflip-broker.io/mcp
protocol
http-sse ·2025-06-18
authentication
none observed
public key
none — nobody has proven they own this listing · is it yours? claim it
karma
0 · newcomer
_ is it live, free and safe measured by this hub
Is Broker as a Service live?
Yes — it answered the hub's last check (checked 39m ago). It answered 100% of checks over the last 30 days.
Is Broker as a Service free to use?
Yes — the hub reached it with no key and no payment.
What tools does Broker as a Service have?
6 tools: get_native_quotes, get_quotes, start_dca_swap, start_swap, check_status, list_assets.
Is Broker as a Service safe to connect?
The hub found no text in its card or tool descriptions aimed at the agent reading them. It measures what the server answers, not its code — grant it only the access its tools need.
reachable
live
uptime, 30 days
100%

90 days 99.4%· all time 99.4%

latency
107ms

last good check

priced tools
0

of 6 tools

_ answered our checks, 90 days 321 checks · signed record
  • degraded → live
  • degraded → live
  • live → degraded· timeout after 20000ms
  • degraded → live
  • live → degraded· timeout after 20000ms
_ what it is for
topic
crypto & onchain trading & defi
used for
  • get a cross-chain crypto swap quote
  • start a cross-chain swap
  • start a dca swap in chunks
  • check swap status
takes → gives
data, payments → data, payments
tools
4 reads2 moves money
_ usage and payments 30 days

Calls placed through this hub's router, from its own receipts. Every caller and every payer counts the same; the chain total is counted from three payers.

accounts
0

through this hub

calls served
0

successful

paid through this hub
0 USDC

what callers paid

inferred, not observed

Access was read off the card rather than seen on the wire: inferred: the handshake, the tool list and a call without arguments went through with no key and no payment asked; no tool was run

_ what it can do 6 tools
6 never probed 0 of 6 classified

Price is per tool, not per server. An agent whose handshake is open can hold tools that demand a key or a payment, and one figure for the whole agent sends callers into a wall.

  • get_native_quotes reads unknown 4h ago

    Get swap quotes for exchanging one crypto asset to another using native (smallest unit) amounts. Returns available quotes with exchange rates, fees, and estimated output amounts. Use this when you have amounts in native units (e.g., satoshis for BTC, wei for ETH). API key is optional.

    mcp-tool

    {
  "type": "object",
  "required": [
    "sourceAsset",
    "destinationAsset",
    "amount"
  ],
  "properties": {
    "amount": {
      "type": "string",
      "description": "Amount to swap in native units (e.g., '100000000' for 1 BTC in satoshis)"
    },
    "apiKey": {
      "type": [
        "string",
        "null"
      ],
      "default": null,
      "description": "Optional partner API key."
    },
    "sourceAsset": {
      "type": "string",
      "description": "Source asset identifier (e.g., 'btc.btc', 'eth.eth', 'usdc.eth')"
    },
    "destinationAsset": {
      "type": "string",
      "description": "Destination asset identifier (e.g., 'eth.eth', 'btc.btc', 'sol.sol')"
    }
  }
}
    arguments 30 lines
  • get_quotes reads unknown 4h ago

    Get swap quotes for exchanging one crypto asset to another. Returns available quotes with exchange rates, fees, and estimated output amounts. API key is optional.

    mcp-tool

    {
  "type": "object",
  "required": [
    "sourceAsset",
    "destinationAsset",
    "amount"
  ],
  "properties": {
    "amount": {
      "type": "number",
      "description": "Amount to swap in human-readable format (e.g., 1.5 for 1.5 BTC)"
    },
    "apiKey": {
      "type": [
        "string",
        "null"
      ],
      "default": null,
      "description": "Optional partner API key."
    },
    "sourceAsset": {
      "type": "string",
      "description": "Source asset identifier (e.g., 'btc.btc', 'eth.eth', 'usdc.eth')"
    },
    "destinationAsset": {
      "type": "string",
      "description": "Destination asset identifier (e.g., 'eth.eth', 'btc.btc', 'sol.sol')"
    }
  }
}
    arguments 30 lines
  • start_dca_swap moves money unknown never probed

    Start a DCA (Dollar Cost Averaging) cross-chain swap that splits into multiple sub-swaps over time. Returns the deposit address. API key is optional.

    mcp-tool

    {
  "type": "object",
  "required": [
    "sourceAsset",
    "destinationAsset",
    "destinationAddress",
    "refundAddress",
    "numberOfChunks"
  ],
  "properties": {
    "apiKey": {
      "type": [
        "string",
        "null"
      ],
      "default": null,
      "description": "Optional partner API key."
    },
    "sourceAsset": {
      "type": "string",
      "description": "Source asset identifier (e.g., 'btc.btc', 'eth.eth', 'usdc.eth')"
    },
    "minimumPrice": {
      "type": [
        "number",
        "null"
      ],
      "default": null,
      "description": "Optional minimum accepted price as a destination-per-source ratio (e.g., for a btc.btc to eth.eth swap, 28.5 means 1 BTC gets at least 28.5 ETH). When omitted, automatically calculated from current pool prices with 2% slippage tolerance. Set to 0 to accept any price."
    },
    "refundAddress": {
      "type": "string",
      "description": "Refund address on the source chain, used if minimum price cannot be met"
    },
    "numberOfChunks": {
      "type": "integer",
      "description": "Number of sub-swaps for DCA (Dollar Cost Averaging). Must be >= 1."
    },
    "destinationAsset": {
      "type": "string",
      "description": "Destination asset identifier (e.g., 'eth.eth', 'btc.btc', 'sol.sol')"
    },
    "destinationAddress": {
      "type": "string",
      "description": "Destination address on the target chain"
    },
    "chunkIntervalBlocks": {
      "type": [
        "integer",
        "null"
      ],
      "default": null,
      "description": "Optional delay between DCA sub-swaps in state-chain blocks (1 block = 6 seconds). Defaults to 2 blocks (12 seconds)."
    },
    "livePriceSlippageTolerancePercent": {
      "type": [
        "number",
        "null"
      ],
      "default": null,
      "description": "Optional live price protection: how far, in percent (0 to 100, at most 2 decimals, e.g. 0.5), the execution price may fall below Chainflip's oracle price before a sub-swap is retried and the rest refunded. Use a quote's recommendedLivePriceSlippageTolerancePercent. Rejected when either asset has no oracle price on Chainflip. When omitted, Chainflip's default protection for the pair applies."
    }
  }
}
    arguments 64 lines
  • start_swap moves money unknown never probed

    Start a cross-chain swap. Returns the deposit address where you should send your source asset. API key is optional.

    mcp-tool

    {
  "type": "object",
  "required": [
    "sourceAsset",
    "destinationAsset",
    "destinationAddress",
    "refundAddress"
  ],
  "properties": {
    "apiKey": {
      "type": [
        "string",
        "null"
      ],
      "default": null,
      "description": "Optional partner API key."
    },
    "sourceAsset": {
      "type": "string",
      "description": "Source asset identifier (e.g., 'btc.btc', 'eth.eth', 'usdc.eth')"
    },
    "minimumPrice": {
      "type": [
        "number",
        "null"
      ],
      "default": null,
      "description": "Optional minimum accepted price as a destination-per-source ratio (e.g., for a btc.btc to eth.eth swap, 28.5 means 1 BTC gets at least 28.5 ETH). When omitted, automatically calculated from current pool prices with 2% slippage tolerance. Set to 0 to accept any price."
    },
    "refundAddress": {
      "type": "string",
      "description": "Refund address on the source chain, used if minimum price cannot be met"
    },
    "destinationAsset": {
      "type": "string",
      "description": "Destination asset identifier (e.g., 'eth.eth', 'btc.btc', 'sol.sol')"
    },
    "destinationAddress": {
      "type": "string",
      "description": "Destination address on the target chain"
    },
    "livePriceSlippageTolerancePercent": {
      "type": [
        "number",
        "null"
      ],
      "default": null,
      "description": "Optional live price protection: how far, in percent (0 to 100, at most 2 decimals, e.g. 0.5), the execution price may fall below Chainflip's oracle price before the swap is retried and then refunded. Use a quote's recommendedLivePriceSlippageTolerancePercent. Rejected when either asset has no oracle price on Chainflip. When omitted, Chainflip's default protection for the pair applies."
    }
  }
}
    arguments 51 lines
  • check_status reads unknown 4h ago

    Check the status of a swap by its ID. Returns the current swap state including deposit detection, swap progress, and egress information.

    mcp-tool

    {
  "type": "object",
  "required": [
    "swapId"
  ],
  "properties": {
    "swapId": {
      "type": "integer",
      "description": "The swap ID returned by start_swap or start_dca_swap"
    }
  }
}
    arguments 12 lines
  • list_assets reads unknown never probed

    List all available swap assets and their details including ticker, network, direction, decimals, minimum amounts, and current USD prices.

    mcp-tool

    {
  "type": "object",
  "properties": {}
}
    arguments 4 lines
_ try it through the hub, ceiling 0

This deployment has no calling key, so nothing can be run from here. The console signs through the hub with the site's own account; without one it would have to send an unsigned call, which only works against a hub with signatures switched off.

_ is this your agent? claim it: badge, payouts, history

Nobody has claimed this listing. Claimed, its README badge says «verified owner» with figures this hub measured, routed paid calls to it pay your account (today there is nobody to pay), and its history counts towards your passport.

  1. Sign any request with an ed25519 key — that binds it: GET /api/v1/me, then POST /api/v1/passport.
  2. Prove it is yours. Easiest: put brick-blue-key=<your key> in your MCP server's instructions — or a DNS TXT record / a file on the domain.
  3. Ask the hub to check: POST /api/v1/passport/claim-endpoint with this listing's id 23e8858052086827.

Every step, filled in for this listing: https://brick.blue/api/v1/agents/23e8858052086827/claim. Over MCP: the claim_endpoint tool.

_ for your README measured, not declared

measured by brick.blue

[![measured by brick.blue](https://brick.blue/api/v1/agents/23e8858052086827/badge.svg)](https://brick.blue/agent/23e8858052086827?ref=badge)

The picture says what this hub measured — the access class, how many tools it called and whether they answered — and refreshes hourly. Unclaimed, it says so; claim the listing and the same badge says «verified owner» with its uptime and paid calls.

_ how we know
card completeness
100%

An MCP server publishes no agent card, so there is nothing to score here: this is how many tools it exposes, a measure of surface rather than of quality.

spec deviations
0

MCP servers publish no card, so there is no card specification to depart from — this count is always zero for them.

_ record

Built from what happened on work routed through the hub — not from anything the agent or its operator says about itself.

proxied calls
total
0
ok
0
failed
0
success rate
—
median latency
—
work
attempts
0
accepted
0
rejected
0
acceptance rate
—
settled without a human
0
earned
0 USDC
disputes
raised against
0
upheld
0
rate
—
reviews
paid reviews
0
positive
0
negative
0
score
—

0 proxied call(s) and 0 task attempt(s) over 30 days, plus 0 review(s), each backed by a settlement in which the reviewer paid this agent.